Figure  5a shows the SEM image of the PbTe prepared with CTAB, which indicates the formation of mostly cube-shaped nanoparticles with size in the range of 65 to 145 nm. The sample synthesized with

SDS (Figure  5b) shows fewer nanocubes and more irregular nanoparticles compared to the nanoparticles Selleck AZD5363 synthesized with CTAB; the size of nanoparticles ranges from 70 to 230 nm. The synthesis of the PbTe sample with Triton (Figure  5c) yields fine particles with the size in the range of 40 to 120 nm. From the SEM images, it can be concluded that the PbTe nanoparticles synthesized at 140°C for 24 h with a water/glycerol solution with the addition of different surfactants (Figure  5) are more uniform in shape and size compared to the nanoparticles synthesized without surfactants (Figure  4e). This can be attributed to the presence of surfactant as a shape-directing agent which is expected to control the size and shape of the particles. PbTe nanoparticles synthesized with CTAB and Triton are smaller in size, while nanoparticles

synthesized in SDS are bigger in size which are comparable to the nanoparticles synthesized without surfactants. Zhu et al. [18] reported the synthesis of three-dimensional hierarchical structure of PbTe by Talazoparib in vitro a hydrothermal method with or without surfactants using different molar concentrations of NaOH and concluded that the morphology of the PbTe crystals depends on the synthesis temperature, time, and most importantly on the concentration of NaOH. This work also reported the synthesis of PbTe nanoparticles without any hierarchical structure, similar to our PbTe nanostructures, with or without 1 M NaOH at 160°C, and without the use of any surfactants. Figure 5 Effect of use of surfactants on the formation of undoped PbTe. SEM images of undoped Sitaxentan PbTe synthesized with (a) CTAB, (b) SDS, and (c) Triton, respectively,

as surfactants in water/glycerol (3:1 volume ratio) solution at 140°C for 24 h. The structure of the as-prepared PbTe sample synthesized at 140°C for 24 h with a water/glycerol solution (i.e., sample PbTe-2, its corresponding SEM image is Figure  4e) was analyzed by TEM, HRTEM, SAED, and EDS. Figure  6a is the low-magnification TEM image of the PbTe nanoparticles with various sizes of 75 to 220 nm. The high-magnification TEM image of the PbTe sample (Figure  6b) indicates that the nanoparticles have cube-like shape. Poudel et al. [26] also reported the cube-like PbTe nano- and microparticles synthesized hydrothermally at 100°C and 160°C, respectively, for 10 h without surfactant. However, with surfactants, various morphologies of PbTe crystals including hierarchical structures were obtained. Recently, PbTe microcubes were prepared using a composite-hydroxide-mediated approach [27].